良工閥門好的閥門告訴您，如果遇到空調閥門漏氣應先打開高壓閥，再打開原料，打開底部壓鈉器，排空，找到低壓閥，即可。
Good Valve tells you, if the air-conditioning valve leakage should first open the high-pressure valve, then open the raw materials, open the bottom sodium presser, emptying, and finally find the low-pressure Valve, can.

如缺氟，只要稍微加點就行了，排空管中的空氣就能打開開關，正與所緊相反的方向轉動，轉到緊的手即可，注意通風即可.用六角排空，看電壓是否正常，如果電壓不正常，則功率變小也屬于正常現象。
If the lack of fluoride, as long as a little bit on the line, the air in the exhaust pipe can open the switch, is the opposite direction of the tight rotation, turn to the tight hand, note the ventilation can be. With the professional hexagonal emptying, see if the voltage is normal, if the voltage is not normal, then the power is also a normal phenomenon.

假如電壓正常，還要看你的環境，結果證明是安裝在多大的房間，是密室，首先要排氣，將空氣從管中排出，即可開啟開關，即應與所緊的相反方向轉動，轉到緊手即可，注意通風即可。
If the voltage is normal, but also depends on your environment, it turned out to be installed in how big room, is the chamber, the first to exhaust, air from the pipe, you can open the switch, that is, should be in the opposite direction of the tight rotation, to hand can be, just be careful of the ventilation.

良工閥門本公司憑借研發的經驗告訴您使用相應尺寸的內六角扳手逆時針打開到底，然后順時針回?fù)芤唤z，以防漏氣。先打開高壓閥，再打開底壓鈉器，排空，找到低壓閥，就可以了。假如是氟化物缺乏，那就加一點點。
The company by R & D Experience tells you to use the corresponding size of the hexagon wrench counter-clockwise open to the end, and then clockwise back a bit to prevent leakage. First Open the high-pressure valve, then open the bottom sodium presser, emptying, and finally find the low-pressure valve, you can. If it’s fluoride deficiency, add a little.